Pella Roto Operator - Reseal Weatherstrip; Attach New Operator and Reattach Sill Frame Stop; Check Unit Operation

Page 2 of 2
B. Reseal weatherstrip to full width of frame sill.
C. Attach the new operator with the original screws.
D. Reattach sill frame stop. Additional finishing nails may
be needed. DO NOT NAIL THROUGH OP ER A TOR CUT
OUT.
E. Check unit operation.
1
Replacing the Roto Operator (Continued):
1B 1B
Awning
Awning
Casement
Casement
1C 1C