12
G
83335
SERVICING INTERVALS
Each time the tool is used
After use
Each year or when
necessary
Clean the tool X
Visually inspect the tool X
Check the clogging of the grilles; clean, if necessary X X
Check the rotor; clean, if necessary X
Check the battery charge level X
Safety label replacement X
Send the tool to an approved dealer for inspection X
REMARK:
Have your blower overhauled every 400 hours or at least once a year.
When the tool is stored, it must be clean and the battery must be charged.
PART NUMBERS FOR SPARE PARTS
INSTRUCTIONS FOR REPAIRING
CAUTION!
G
Only perform the maintenance and servicing interventions described in this manual.
More important repairs can only be carried out by an approved Pellenc dealer.
Fine grille
- Always make sure the tool is clean and its battery is charged before storing it.
- Store the tool away from humidity and dust.
- Store the tool in a safe place, out of reach of children and unauthorized persons.
STORAGE
To Next Page