pellenc AIRION - Airion Specific Safety and Indications; Airion Safety Instructions; Safety Indications Explained

5
1
2
3
4
5
57_11_001A
57_11_010A
1
2
6
3
4
5
1– Do not misuse the power lead. Never use the power lead to carry, pull or disconnect the tool. Keep the
power lead away from heat, lubricant, sharp edges and moving parts.
2– Never modify the connector in any way whatsoever.
3– Wear safety equipment. Always wear eye protection.
4– The dust raised during operation can be harmful to health. In case of liberation of dust, wear a dust
mask.
5– Comply with the tool servicing instructions. Check that the moving parts are not misaligned or jammed,
that there are no broken parts or that there is no other condition which could affect the operation of the tool.
If there is damage, have the tool repaired before using it.
6– Inspect the work area prior to starting. Remove all debris and hard object such as stones, glass, wires,
etc. which could  y and cause serious injuries or damage when the blower is in use.
7– Use the blower to blow out grass, straw or leaf waste, urban garbage.
8– Never blow towards people or animals - the blower can lift up small objects and throw them out at high
speed - risk of injury.
9– While using the blower, be careful not to endanger small animals.
10– Stop the blower, turn off the battery, disconnect the power cord and wait for the rotor to stop before
opening the air intake grille: risk of serious injuries (moving part).
11– Do not obstruct, part or all of the air intake.
12– Ensure air intake grille maintenance.
13– Inspect the blower before each use, check that the parts are not worn, loose, damaged or missing. Do
not use the blower if it is not in perfect condition.
14– To avoid  re spreading, do not use the blower near wood  res or barbecues, etc.
15– Do not draw up solids or liquids through the intake duct - risk of damaging rotating components and
intake grilles.
SAFETY INDICATIONS
1– LwA sound power level guaranteed.
2– Read the user guide.
3– It is mandatory to wear safety goggles.
4– Nobody must stand within 5 m (16 ft) of the tool in operation.
5– Never put your  ngers or insert objects in the air intake grille. When air intake grilles are not mounted, there is a risk
of impact with rotating parts - risk of injuries ! - risk of damaging rotating components.
Protective equipment Wearing is
1 Visor Optional
2 Gloves Recommended
3 Non-slip safety boots Optional
4 Ear protection Recommended
5 Safety goggles Mandatory
6 Protective trousers Recommended
SAFETY INSTRUCTIONS FOR AIRION