What to do if there is a battery problem with pellenc FIXION 2 Tools?
If you're experiencing a battery problem with your Pellenc Tools, first, ensure the battery is adequately charged by checking the gauge display. If the problem persists, return the complete equipment in its original packaging to a certified repair service.
What to do if there is a charger problem with pellenc FIXION 2?
If you encounter a charger problem with your Pellenc Tools, return the complete equipment in its original packaging to a certified repair service.
How to fix voltage too low after 3 hours of non-use in Pellenc Tools?
If you find the voltage is too low after 3 hours of non-use with your Pellenc Tools, recharge the battery immediately.
General| Battery type | Lithium-ion |
|---|---|
| Charging time | 1.5 hours |
| Category | Vine tying tool |
| Maximum tying diameter | 25 mm |
| Weight | 800 g |
| Tying speed | 0.4 seconds per tie |
| Number of ties per hour | Up to 60 ties per minute |
To Next Page
