CAUTION
Read Rules for Safe Operation and Instructions Carefully.
WARNING
1.To reduce the risk of fire or electrical shock, do not use this fan with any solid-
state speed control device.
2. If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarily qualified person in order to avoid a hazard.
3. This appliance has a polarized plug ( one blade is wider than the other ).To
reduce the risk of electric shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug .If it
still does not fit, contact a qualified
electrician. Do not attempt to defeat this
safety feature.
4. Do not leave the fan running unattended.
5. Do not run cord under carpeting. Do not cover cord with throw rugs, runners,
or similar coverings. Arrange cord away from traffic area and where it will not
be tripped over.
RULES FOR SAFE OPERATION
1. Never insert fingers, pencils, or any other objects through the fan housing when
the tower fan is running. Unplug the fan when moving it from one location to
another.
2. Disconnect the fan before cleaning.
3. To avoid overturning, be sure the fan is on a stable surface when operating it.
4. To reduce the risk of electric shock, DO NOT use the fan by a window.
PART NAMES
1. Body
2. Rear base
3. Front base
4. Base clip
5. Power cord
PARTS ASSEMBLY
1. Pull power cord (5) out slightly.
2. Put the rear base (2) on the body (1) by inserting the cylinders under the
body to blind holes on rear base as shown on diagram.
3. Put front base on rear base (2) and fix the body, the rear base and front base
by base clip (4) as shown.
2
To Next Page
Loading...
