OPERATION INSTRUCTIONS
• Place the heater on a firm level surface free from obstructions, and at least 3ft.away
from any wall and any other objects such as furniture, curtains, plants or combustible
material.
• With the Power and Setting Control “ 3 ” in the “ OFF ” position, plug the heater into a
grounded 120V outlet.
• Turn the heater “ON” by turning the Power and Setting control “ 3 ” clock - wise to
your desired power setting (LOW, MED, HIGH). The Power Indicator Light “ 1 ” will
illuminate.
• Turn the Thermostat Control “ 2 ” to your desired setting from “MIN” to “MAX”.
• Setting for Optimum Comfort: When the room reaches a comfortable temperature,
slowly turn the Thermostat Control “ 2 ” counter-clockwise until the heater turns off.
This is the point at which the thermostat setting equals the room temperature. At this
setting, the thermostat will automatically turn the heater on and off to maintain this
selected temperature.
• Cord Wrap-Neatly stores power cord when the heater is not used.
• Convenient Carry Handles and Heavy-Duty Caster Wheels-Allow for easy maneuvering
from room to room.
NOTE
This heater include a safety tip over switch, which will shut the heater off in case it is
tipped over. If at any time, the heater does tip over, please put the heater back in the
upright position (wheels on bottom, controls on top). The heater will resume its normal
operation.
This heater includes an Overheat Protection System that shuts the unit off if it overheats
due to abnormal conditions. If this occurs turn the heater “OFF”, unplug it, and inspect
and remove any objects on or adjacent to the heater. Allow it to cool for a few minutes,
plug it back in, and resume normal operation.
This heater has additional features:
ADDITIONALFEATURES
07
To Next Page
Loading...
