Peloton PL-21 - Setting Up Your Bike; Bike Placement and Movement

15
|
SETTING UP YOUR BIKE
SETTING UP YOUR BIKE
LOCATION REQUIREMENTS
y Place the Bike on a solid, level and horizontal surface.
y Use a mat to avoid damage to the Bike and oor.
y Allow a clearance of 24in/60cm on each side of the Bike.
2 4 i n / 6 0 c m
2 4 i n / 6 0 c m
CAUTION: Ensure that the power cable never passes under the Bike. Always keep
the power cable clean and dry. Sweat, spills, and other damage to the power cable may
result in property damage or bodily harm.
2 4 i n / 6 0 c m
2 4 i n / 6 0 c m
For instructions on how to assemble the Peloton Bike, see the Peloton Bike Home
Assembly Guide. If your Bike was not professionally assembled and did not come with
a Home Assembly Kit (including additional tools), go to onepeloton.com/setup for
instructions and contact Member Support for assembly tools.