32
EVERY 15 TO 20 RIDES
MAINTENANCE AND CARE CONTINUED
Emergency Brake: Press down on the resistance knob while pedaling slowly. The ywheel
should come to a complete stop immediately. If it does not, stop using the Bike immediately
and contact Peloton Support.
Frame: Check the entire frame for signs of wear and damage, and tighten any loose bolts.
EVERY 3 TO 5 RIDES
Cleaning: Clean the Peloton Bike thoroughly using a damp cloth and a mild household
cleaner diluted in water. Clean the touchscreen using an electronics wipe.
Cleats: Use a 4mm Allen wrench to tighten any loose screws attaching your cleats to your
cycling shoes.
Saddle: Make sure the saddle is parallel to the ground. Then use the included 13mm
wrench to tighten the seat-xing nuts on both sides.
To Next Page
Loading...