Need help?Do you have a question about the Peltor lite-com iii and is the answer not in the manual?
Diagrams illustrating the control panel, display, and accessories of the Lite-Com III headset.
Technical data tables showing sound attenuation values for headband and helmet attachments across different frequencies.
Important safety warning regarding the use and charging of rechargeable batteries.
Explanation of all buttons for device operation, including power, volume, mode, settings, and transmission.
Summary of all indicators on the device display, including ambient sound, radio volume, channel, and battery status.
Instructions on how to switch the Lite-Com III on and off using the ON/OFF button.
Guide for controlling the volume of ambient sounds with UP/DOWN selectors.
Procedure for adjusting the Lite-Com radio reception volume via the MODE button.
Steps to set the desired channel for transmitting and receiving using MODE and level selectors.
How to set VOX sensitivity for automatic transmission based on voice.
Adjusting the sensitivity for hiss reduction to eliminate receiver noise.
Configuring tone selective transmission and reception for individual communication.
Selecting between low (LO) and high (HI) power output for transmission.
Programming and selecting four preset channel and function configurations.
Using the PTT button for manual transmission over the Lite-Com radio.
Utilizing the PTT AUX button for controlling externally connected devices.
Accessing and adjusting advanced device settings via a special button combination.
Setting the maximum transmitting time and automatic return to VOL.
Automatic return to VOL setting.
Returning the device to factory settings.
Enabling or disabling the Antivox feature to block VOX.
Selecting external connection settings for various equipment types.
Configuring automatic shut-off after two hours and power output settings.
Instructions for properly fitting the headset headband for comfort and seal.
Steps for attaching the headset to a protective helmet, including working and airing positions.
Guidance on continuous use for hearing protection and managing external input volume.
Methods for cleaning the headset exterior with warm soapy water.
Procedure for replacing batteries, including warnings about recharging dry cells.
Detailed technical data for LPD and PMR models, including frequency, channels, and output power.
Information on power consumption, operating, and storage temperatures for the device.
Details on hearing protection approvals and radio evaluations according to European standards.
Information on hygiene kits, single-use protectors, and microphone protectors.
Details on wind protectors for speech and ambient microphones.
Information on accumulator batteries and compatible battery chargers.
List and description of various connector cords for external communication equipment.
To Next Page
General
