Special Note:
1. This keyboard doesn’t support the Windows
Mobile.
2. For Android users: The Caps Lock indicator may
not light up, but will still function normally.
3. While connected to an iOS or OSX device, the
red printing is used. PC standard layout and
Apple standard layout are slightly different
Bluetooth and wired function
introduction
1. Bluetooth wireless connection: Fit for
devices with Bluetooth function. Like tablets,
smartphones, etc.
2. USB wired connection: Fit for devices whitch
can be connected with USB cable, like
notebooks, PC, etc.
3. Micro-USB cable. Wired mode:connect with
desktops and notebooks, sync and charging
function. Wireless mode: charging for the
keyboard.
Pairing with tablets and phones
1. Step 1. Slide the Power switch to right side,
to turn on the keyboard, power light will turn
green for 10 seconds. Note the State light
should be blue.
Optional step. If the State light is green when power
is switched on, press ”Fn +
” key to change to
Bluetooth state.
2. Step 2. Pairing: Hold Fn key then press
bluetooth channel 1 or 2 for 2 seconds to
activate pairing mode.
LED will blink blue. Press the ”Fn + ” Keys
together to enter pairing mode. The Bluetooth light
will start to blink blue.
3. Step 3. On the iPad, select: Settings- Bluetooth-On.
4. Step 4. The iPad will display “Penclic Mini
Keyboard KB3” as an available device.
5. Step 5. Select “Penclic Mini Keyboard KB3” on the
iPad, click on it, the keyboard will now be paired to
iPad and the Bluetooth indicator will turn off.
6. Step 6. Press ”Fn +
” keys on the keyboard
switch to the iOS operating system setting.
Pairing with desktop (bluetooth)
1. Step 1. Slide the Power switch to right side, to turn
on the keyboard, power light will turn green for 10
seconds. Note the State light should be blue.
Optional step. If the State light is green when power
is switched on, press ”Fn +
” key to change to
Bluetooth state.
2. Step 2. Pairing:Hold Fn key then press bluetooth
channel 1 or 2 for 2 seconds to activate pairing
mode.
LED will blink blue. Press the ”Fn +
” Keys together to enter pairing mode. The
Bluetooth light will start to blink blue.
3. Step 3. On your device, go to “settings”. Activate
its Bluetooth function and search for the
keyboards device.
4. Step 4. The device will display “Penclic Mini
Keyboard KB3” as an available device.
5. Step 5. Select “Penclic Mini Keyboard KB3”
on your device, click on it, the keyboard will
now be paired to your device and the Bluetooth
indicator will turn off.
6. Step 6.Choose your operating system.
Fn +
Android
Fn + PC/Windows
Fn +
iOS och OSX
Switching between already paired
Bluetooth devices:
Hold Fn then tap 1 or 2 key to switch between already
paired devices. Switching time depends on the device.
Pairing with desktop (cable)
Connect the microUSB charge cable. LED will turn
green or red depending on charge status.
Hold Fn key then press 3. The
LED will turn green if
the connection to the computer is ok.
Fn +
Android
Fn +
PC/Windows
Fn +
iOS and OSX
Note for wireless mode
1. For other Bluetooth enabled devices, please
verify the Bluetooth capability before
attempting to connect to the keyboard.
2. After pairing for the first time, your device
will automatically connect to the keyboard
automatically when powering on or waking up
the keyboard. Unless the keyboard has been
paired with something else.
3. In case of connection failure, Delete the pairing
record from your device and try the above
procedures again.
Changing keyboard layout
(chosen in the operating system)
Samsung Android: Skift + Space
Google Android: Ctrl + Space
Windows: Alt + skift
iOS 8:
+Space
iOS 9: Ctrl + Space
Power saving mode (bluetooth mode)
The Keyboard will enter sleep mode after being idle for
30 minutes. To activate it, press any key and wait for 3
seconds to reconnect.
How to charge
1. Use the included Micro-USB cable for charging.
Connect one end to a USB charger or port, and
the other to the keyboard. The keyboard can be
used while charging.
2. Whilst charging, the power indicator will turn
red. Approximately 2 hours until fully charged.
(USB charger is not included, but cable to USB
port works)
Battery life tip
When not in use for a prolonged period of time, it
is recommended that the keyboard is turned off to
lengthen the battery life.
To Next Page
Loading...