Pendulum CNT-91 Manual

Fig. 2-10 Selecting analog or digital filter.
Input B
The settings under Input B are equal to those under Input A.
Settings
This key accesses a host of menus that affect the measurement. The figure above is valid after changing the default
measuring time to 10 ms.
Fig. 2-11 The main settings menu.
Meas Time
Fig. 2-12 Submenu for entering measuring time.
This value input menu is active if you select a frequency function. Longer measuring time means fewer measurements
25 / 50

Pendulum CNT-91 Specifications

General

Brand	Pendulum
Model	CNT-91
Category	Measuring Instruments
Language	English