Penguin FLORENCE - Page 57

57
STEP #14
14.1 .Use Bolt (Cc-3) and Nut (Hh-3-2) to assemble Crossbeam L-1 and Crossbeam L-2 together.
14.2. Attach the assembled Crossbeam (L-1) and Crossbeam (L-2) to the Left side rafter (F) and
Right side rafter (F1) through Gable Joint (P-3) and Gable Joint (Q-3), connect the middle to the
Regular rafter(U-3),and fix them with Bolt (Cc-3).Tighten the Bolts manually.
L-1
L-1
F
F
F1
F1
G
G
P-3
P-3
Q-3
L-1
L-1
L-2
L-2
L-2
L-1
L-1/L-2
Cc-3
L-2
Cc-3
Hh-3-2
Gg-3
L-2
Q-3
Cc-3
Cc-3