PENKO SGM720 User Manual

For more information visit
www.penko.com - technical support - literature library
SGM700
PENKO Engineering BV
The Leading Experts In Weighing & Dosing
Digitizer
Manual

PENKO SGM720 Specifications

General

Brand	PENKO
Model	SGM720
Category	Measuring Instruments
Language	English

Summary

IMPORTANT SAFETY INFORMATION

1. Load cell / power connection

1.1 SGM700 basic digitizer

Details the load cell and power connection for the basic SGM700 model.

1.2 SGM710 digitizer analog

Explains load cell and power connection for the SGM710 analog digitizer.

1.3 SGM720 digitizer ethernet

Covers load cell and power connection for the SGM720 Ethernet digitizer.

1.4 SGM730 digitizer CAN

Describes load cell and power connection for the SGM730 CAN digitizer.

1.5 SGM740 digitizer Profibus

Details load cell and power connection for the SGM740 Profibus digitizer.

1.6 SGM750 digitizer Serial

Explains load cell and power connection for the SGM750 Serial digitizer.

3. Explanation of front keys

4. First Use of Indicator

4.1 Configuration Menu Structure

4.2 Weigher Settings

Guide to setting up initial weigher parameters like step size and decimal point.

4.3 Calibration

Details the process of calibrating the indicator as part of initial setup.

4.4 First Use with PI Mach II Software

Explains how to configure the indicator using the PI Mach II software.

5. Main Menu

6. Configuration Menu

6.1 Setpoint Function Settings

6.2 Setpoint Action Settings

6.3 Analog Output Settings

6.4 Local Bus Communication Settings (RS485)

6.5 Ethernet Settings (SGM720 only)

6.6 CANbus Settings (SGM730 only)

6.7 Profibus Settings (SGM740 only)

6.8 RS232 Port Settings (SGM750 only)

6.9 RS422 Port Settings (SGM750 only)

6.10 Indicator Settings

6.14 Pre-calibration Settings

6.15 Calibration Settings

Manages calibration points, checks information, and performs deadload compensation.

6.16 Theoretic Calibration

7. Firmware Update

8. Error Codes

8.1 Weigher Error Codes