PENKO SGM750 User Manual

For more information visit
www.penko.com - technical support - literature library
SGM700
PENKO Engineering BV
The Leading Experts In Weighing & Dosing
Digitizer
Manual

PENKO SGM750 Specifications

General

Brand	PENKO
Model	SGM750
Category	Measuring Instruments
Language	English

Summary

SGM700 Digitizer Manual

IMPORTANT SAFETY INFORMATION

Essential safety guidelines and warnings for the SGM700 digitizer.

Load cell / power connection

Details on connecting load cells and power supply for the SGM700.

SGM700 basic digitizer

Basic connection details for the SGM700 digitizer.

SGM710 digitizer analog

Analog connection details for the SGM710 digitizer.

SGM720 digitizer ethernet

Ethernet connection details for the SGM720 digitizer.

SGM730 digitizer CAN

CAN bus connection details for the SGM730 digitizer.

SGM740 digitizer Profibus

Profibus connection details for the SGM740 digitizer.

SGM750 digitizer Serial

Serial connection details for the SGM750 digitizer.

Indication of Display

Explanation of the SGM700 digitizer's display indicators and symbols.

Explanation of front keys

First use of indicator

Initial setup and configuration steps for the SGM700 indicator.

First use of indicator -Configuration menu structure-

First use of indicator -Calibration

Configuration Menu

Accessing and configuring various settings of the SGM700 digitizer.

- - - Fun setpoint function settings (not for SGM710)

- - - dAC Analog output settings

- - - Eth Ethernet settings (SGM720 only)

- - - Can Canbus settings (SGM730 only)

- - - - Pb Profibus settings (SGM740 only)

- - - 232 RS232 Port settings (SGM750 only)

- - - 422 RS422 Port settings (SGM750 only)

- - - Ind Indicator settings

- - - CAL Calibration settings

Procedures for adding, checking, and deleting calibration points.

- - - SoF Firmware update

Firmware update

Step-by-step guide to update the SGM700 firmware via USB.

Error Codes

List of error codes and their corresponding solutions for the SGM700.

Weigher error Codes