Need help?Do you have a question about the Pentair Pool Products IntelliChlor IC40 and is the answer not in the manual?
General| Brand | Pentair Pool Products |
|---|---|
| Model | IntelliChlor IC40 |
| Category | Swimming Pool Filter |
| Language | English |
Details the advanced design and capabilities of the IntelliChlor unit.
Lists and describes the various parts that make up the IntelliChlor system.
Explains the function of the control panel, buttons, LEDs, and cell components.
Details the specifications and function of the IntelliChlor Power Center and IC15 Power Supply.
Provides a visual overview of the IntelliChlor system installation.
Instructions for installing feeders after the IntelliChlor cell to prevent damage.
Illustrates a bypass loop configuration for high flow rate applications.
Shows recommended plumbing for the IntelliChlor unit in pool/spa systems.
Explains the LED indicators for pool salt levels and their meanings.
Details the LED indicators for power, cell status, and water flow.
Shows how LEDs indicate the percentage of chlorine production time.
Instructions for using the More and Less buttons to control chlorine output.
Describes the automatic self-cleaning feature for cell blades.
Discusses essential water chemistry and conditions for optimal operation.
Details ideal water chemistry parameters for salt water pools.
Guidance on adjusting chlorine output for covered or vinyl liner pools.
Describes the initial 30-day operation and self-cleaning cycle settings.
Explains how the IntelliChlor operates and how to adjust chlorine output.
Information on integrating the IntelliChlor with a pool pump timer.
Details any daily checks or service required for the unit.
Covers weekly water testing for pH, alkalinity, and chlorine levels.
Outlines monthly checks for salt levels and water samples.
Explains how to check the operating hours of the IntelliChlor cell.
Provides instructions for cleaning the IECG cell blades, including acid washing.
Lists all items included in the IntelliChlor installation kit.
Specifies the tools needed for the installation process.
Information on using the dummy cell for pool start-up and debris removal.
Guidance on choosing the correct IntelliChlor model (IC20, IC40, IC60) for your pool.
Instructions for installing the IntelliChlor cell assembly into the plumbing system.
Steps for connecting the cell power cable to the Power Center.
Steps for connecting the cell power cable to the IC15 Power Supply.
Wiring instructions for connecting the Power Center to IntelliTouch, EasyTouch, or SunTouch.
Detailed wiring diagram and instructions for automation system integration.
Specific wiring steps for connecting IntelliChlor to a SunTouch system.
Addresses common problems like low chlorine, LED errors, and flow issues.
Covers troubleshooting for LED indicators, power issues, and cell status.
Diagram and instructions for wiring the system using 115 VAC with a pool pump timer.
Diagram and instructions for wiring the system using 220 VAC with a pool pump timer.
Wiring diagram for the IC15 model using 110 VAC and a pool pump timer.
To Next Page
