1
Congratulations on your purchase of the Great White
®
II Automatic Pool Cleaner! Nothing quite compares to the Great
White II’s ability to make dirt disappear. With its 38cm cleaning path and unique bristle drive, your Great White
®
II
automatic pool cleaner will deliver fast, complete coverage of your pool. First, however you’ll have to install the cleaner
and perhaps make some minor adjustments.
This manual covers the steps needed to install, adjust and maintain your new cleaner.
POOL PREPARATION
Preparing Your Pool
Before you assemble and install your cleaner, you should make
sure that your pool is clean and free of algae. If necessary, make
the following preparations before proceeding.
• Chemically balance the pool water
• Brush the pool and let the debris settle
• Hand vacuum the pool thoroughly
• Clean the filter and pump strainer basket (Figure 1)
Cleaner Components
Remove the cleaner and all of its parts
from the box and check to make sure that
all components were included (Figure 2).
• Cleaner
• Swivel Assembly
• Handle Adapter
• Elbow
• Leader Hose: One 40” (1.02 m) length
• Hose: Eleven 40” (1.02 m) lengths
• Vacuum Regulator
• Threaded Adaptor
• Reducer Cone
• Flow Gauge
Figure 1
To Next Page
Loading...
