EasyManua.ls Logo

Pentair REBEL - User Manual

Pentair REBEL
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
KREEPY KRAULY
®
REBEL™ Suction Side Pool Cleaner Installation and User’s Guide
REBEL™ Suction Side Pool Cleaner Installation and User’s Guide
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
INSTALLATION AND
USER’S GUIDE
REBEL
SUCTION SIDE POOL CLEANER

Questions and Answers

  • S
    Stephanie WebbJul 26, 2025
    How to troubleshoot slow movement of Pentair REBEL Swimming Pool Vacuum?
    • S
      simpsonkarenJul 26, 2025
      If your Pentair Swimming Pool Vacuum cleaner is not moving or is moving too slowly, there might not be enough flow through the system, or the pump may not be primed properly. You can check the flow and adjust it using the regulator valve. Also, inspect the cleaner for any debris inside, and make sure the filter is clean by backwashing it. Ensure that the main drain and all suction lines are closed, except the one connected to the cleaner. Look for obstructions in the filter, pump basket, or pump impeller. If the issue persists, the pool pump and filter system might be too small, and you should consult a pool professional.
  • R
    Robert RussoJul 31, 2025
    What to do if Pentair REBEL stays in one place?
    • S
      sarahtaylorJul 31, 2025
      If your Pentair Swimming Pool Vacuum cleaner stays in one end of the pool, you can check the water flow and adjust it using the regulator valve. Redirect the return line water flow as necessary using the eyeball diverter. Ensure the hose is long enough to reach the furthest point in the pool and that the hose float is correctly placed. Also, ensure the swivel assembly rotates smoothly; if not, clean it.
  • M
    Madison RichardsonAug 4, 2025
    Why Pentair Swimming Pool Vacuum won't climb walls?
    • A
      Ashley Lee MDAug 4, 2025
      If your Pentair Swimming Pool Vacuum cleaner won’t climb the pool walls, check that the tires are not excessively worn, as worn tires won't grip the walls. Also, check the water flow and adjust it using the regulator valve. Make sure the leader hose is installed correctly and the hose float is properly positioned.
  • D
    David HallAug 8, 2025
    What if right wheel of Pentair REBEL Swimming Pool Vacuum won't turn?
    • E
      Evan GentryAug 8, 2025
      Check the Pentair Swimming Pool Vacuum cleaner for obstructions inside.
  • C
    Charles Mcneil MDAug 12, 2025
    What to do if Pentair REBEL climbs too high?
    • H
      Heather WiseAug 13, 2025
      If your Pentair Swimming Pool Vacuum cleaner climbs the wall too much or climbs out of the pool, check the water flow and adjust it using the regulator valve.
  • M
    Ms. Lauren Miller DDSAug 16, 2025
    What to do if Pentair REBEL Swimming Pool Vacuum falls on side?
    • R
      Robert BryanAug 17, 2025
      If your Pentair Swimming Pool Vacuum cleaner falls on its side and takes too long to recover, check the hose float placement to ensure it is correctly positioned. Verify that the leader hose is installed correctly and that the hose is long enough to reach the furthest point in the pool. Also, the return eyeball fittings may be pushing the cleaner hoses away.
  • S
    shawn86Aug 20, 2025
    Why Pentair REBEL stays on main drain?
    • A
      Alyssa GonzalesAug 21, 2025
      If your Pentair Swimming Pool Vacuum cleaner stays on the main drain, ensure that the main drain is closed and that a main drain grate is installed. If the problem persists, you may need assistance from a pool professional.

Summary

Important Safety Instructions

General Installation Information

General installation guidelines and pre-installation checks for the pool cleaner.

Consumer Information and Safety

Key safety information for users regarding operation, maintenance, and potential hazards of the pool cleaner.

Disclaimer of Liability

Manufacturer's disclaimer regarding pool finish damage and user responsibility for pool maintenance.

Pool Preparation

Pool Preparation Steps

Steps to prepare the pool before installing the cleaner, including water balance and debris removal.

Cleaner Components Identification

List and visual identification of all parts included with the pool cleaner package for verification.

Assembling the Cleaner

Hose Assembly Instructions

Guidance on connecting hose sections, leader hose, and hose float for optimal cleaner operation.

Installing the Cleaner

Standard Installation Procedures

Steps for connecting the cleaner hose to various types of skimmer boxes.

Adjusting Flow and Cleaner Speed

Using the Flow Gauge

Procedure for setting correct water flow using the included flow gauge.

Calculating Cleaner Speed (RPM)

Method to determine and adjust cleaner speed (RPM) without the flow gauge.

Cleaner Adjustments and Operation

Hose Length Determination

Guidance on determining and adjusting correct hose length for optimal cleaner coverage.

Eyeball Diverter Positioning

Instructions on positioning the eyeball diverter to optimize water flow and cleaner movement.

Maintenance

Removing Turbine Debris

Detailed steps for safely removing debris from the cleaner's turbine and internal components.

Tire Replacement

Troubleshooting

Replacement Parts

Pentair REBEL Specifications

General IconGeneral
TypeSuction-side pool cleaner
Pool TypeIn-ground
Warranty1-Year Limited Warranty
Cleaning PatternRandom
Hose Length32 ft

Related product manuals