Need help?Do you have a question about the Pentair RACER LS and is the answer not in the manual?
General| Pool Type | In-ground |
|---|---|
| Cable Length | 60 ft |
| Type | Robotic |
| Power Source | Electric |
| Warranty | 2 years |
| Cleaning Coverage | Floor and walls |
Key considerations and checks before installing the pool cleaner, including pool type and filter system readiness.
Lists and identifies the various parts of the RACER® LS pool cleaner.
Describes the cleaner's random movement, climbing ability, and backup mode.
Refers to separate instructions for the booster pump installation process.
Step-by-step guide for connecting the cleaner to the pool's return line.
How to measure and ensure proper water flow for optimal cleaner performance.
Guide to cutting and assembling the feed hose to match pool dimensions.
How to connect the cut hose sections and verify final length.
Key checks to ensure proper assembly and readiness before operation.
Steps for turning on the pool and booster pumps for cleaner operation.
Details on the cleaner's movement, climbing ability, and cleaning cycles.
Step-by-step instructions for removing, emptying, and reattaching the debris bag.
Procedure for cleaning the debris screen located in the in-line filter.
Guide for connecting and disconnecting the sweep hose.
Guide on using the wall fitting valve to control water flow.
Inspect tires, debris bags, sweep hose, and roller rings for wear and tear.
Guidelines for backwashing the pool filter and flushing lines.
Recommendations for storing the cleaner and hose during off-seasons.
Procedure for cleaning the secondary filter screen in the wall fitting.
Visual diagram identifying all replacement parts for the cleaner.
Comprehensive list of part numbers, descriptions, and item numbers.
Solutions for slow movement, hanging at steps, and tilting.
Troubleshooting for cleaner not reversing, not climbing, or hose tangling.
Addressing booster pump noise and rear wheel dragging.
To Next Page