Need help?Do you have a question about the Pentair KREEPY KRAULY E-Z VAC and is the answer not in the manual?
General| Brand | Pentair |
|---|---|
| Model | KREEPY KRAULY E-Z VAC |
| Category | Swimming Pool Vacuum |
| Language | English |
Covers pre-installation checks, pool requirements, and system preparation for cleaner installation.
Manufacturer disclaims liability for pool surface conditions and customer responsibilities.
Instructions to record the serial number and return the warranty card to activate coverage.
Specifies pool types and cove requirements for optimal cleaner operation.
Steps before assembly: chemical balance, brushing, vacuuming, filter cleaning.
List of parts included in the cleaner package for verification.
Step-by-step guide for attaching the seal, bumper strap, and hose.
Connects cleaner to skimmer via compression adapter and regulator valve.
Calibrates flow using the flow gauge and regulator valve for optimal performance.
Addresses too much or too little vacuum/flow for proper cleaner operation.
Determines correct hose length for full pool coverage and avoids altering float position.
Corrects cleaner steering issues by redirecting return line water flow.
Provides guidance on positioning the eyeball diverter for best cleaning coverage.
Instructions to clear debris that obstructs the cleaner's flapper movement.
Resolves issues like cleaner not moving, pulsating, or tracking repetitive patterns.
To Next Page