Pentair INTELLICHLOR IC60 - User Manual

16 pages

To Next Page

To Next Page

Loading...

INTELLICHLOR

®

Salt Chlorinator Installation Guide

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

FOR USE WITH INTELLILCHLOR CHLORINE GENERATOR

MODEL IC20, IC40 & IC60

INTELLICHLOR POWER CENTER

INSTALLATION AND USER’S GUIDE

®

http://waterheatertimer.org/How-to-control-intellichlor.html

Power-center-manual-5209590

Table of Contents

Questions and Answers:

C
Chase SmithAug 3, 2025
What to do if the IntelliChlor green power light is off on my Pentair Power Supply?
- D
  Dana TrevinoAug 3, 2025
  If the IntelliChlor green power light on your Pentair Power Supply control panel isn't on, here's what you can check: * **Blown Fuse:** Replace the 10AMP fuse located on the main circuit board. * **No AC Power:** Make sure the time clock is sending 110VAC or 220 VAC to the Power Center when it's active. * **Incorrect Wiring:** Check the transformer leads are correctly wired to the AC source, using the wiring diagram on the inside of the Power Center cover.

Pentair INTELLICHLOR IC60 Specifications

General

Brand	Pentair
Model	INTELLICHLOR IC60
Category	Portable Generator
Language	English

Summary

Important Safety Instructions

IntelliChlor Power Center Overview and System Components

Power Center Overview

Details the IntelliChlor Power Center's function, transformer, fuse, and LED indicator.

System Components

Lists the parts of the IntelliChlor Salt Chlorinator system including cells and bypass cell.

Installation and Operation

Operating Instructions

Guidance on setting pool pump timer for optimal water turnover and chlorination.

Installation Kit Contents and Required Tools

Lists items included in the kit and necessary tools for the installation process.

Installing the Power Center

Step-by-step instructions for mounting and securing the Power Center enclosure.

Connecting AC Power

Guide on how to connect the AC power supply and ground wire to the Power Center.

Wiring, Specifications, and Troubleshooting

Electrical Specifications

Details input/output voltages, wattage, and circuit protection requirements for the system.

Transformer Wiring

Diagrams and instructions for wiring the transformer for 110 VAC and 220 VAC.

General Troubleshooting

Addresses common issues like the power light not turning on and possible causes.

Advanced Configuration and ORP Controller

Power Center with ORP Controller

Instructions for connecting the Power Center to an ORP controller for automated chlorination.

ORP Controller Troubleshooting

Specific troubleshooting steps for issues with the ORP controller and IntelliChlor interaction.

Related product manuals

Pentair IntelliChlor IC40