Need help?Do you have a question about the Pentair MagicBowl Water Effect and is the answer not in the manual?
General| Brand | Pentair |
|---|---|
| Category | Outdoor Fireplace |
| Diameter | 36 Inches |
| Installation | Professional Installation Recommended |
| Product Type | Water Bowl |
| Model Name | MagicBowl |
| Compatibility | Pentair fire features |
| Type | Water effect bowl for fire features |
General warnings for installers and owners, product use, and code compliance.
Details the risks of electrical shock, burn, or death associated with underwater pool lights.
Warnings regarding cable replacement, splicing, and correct transformer usage.
Important notice that the FireFX LED light is non-serviceable and requires complete replacement.
Describes the MagicBowl Water Effect, its features, and materials.
Explains how to control the MagicBowl Water Effect using a standard wall-mount switch.
Details how to control the MagicBowl Water Effect using Pentair IntelliTouch® and EasyTouch® Control Systems.
Provides guidelines for using external transformers with multiple MagicBowl Water Effects, including cable length.
Lists wattages for various lights and explains transformer load limits to prevent overload.
Describes the normal flickering behavior of the FireFX LED light when powered on.
Specifies electrical requirements and code compliance needed before installing the light fixture.
Details the required placement of the junction box and low voltage transformer relative to the pool.
Covers important precautions for water supply, flow, bowl placement, and niche installation.
Details critical steps like bulkhead assembly, niche securing, and drain line installation.
Instructions for installing the niche in the mounting surface and securing it properly.
Guidance on ensuring the niche flange aligns flush with the finished surface of the bowl mounting area.
Emphasizes disconnecting power and highlights electrical shock risks during light assembly installation.
Step-by-step guide for feeding the power cord, stripping wires, and connecting them to the transformer or junction box.
Instructions for physically inserting the light assembly into the niche, including two-person requirements.
Guidance on checking the grommet seating and performing a final operation test of the light.
Steps before installing the bowl, including testing the light and preparing the bulkhead.
Instructions for applying adhesive and lowering the bowl onto the niche pipe for secure attachment.
Details on how to install the water spout assembly into the bulkhead fitting inside the bowl.
Provides instructions for removing and re-installing the bowl, including gasket and torque specifications.
Highlights electrical shock risks and the need for licensed electricians for replacement.
Reiterates that the FireFX LED light is non-serviceable and must be replaced as a complete assembly.
Steps for switching off power, disconnecting wires, and preparing for cord pulling.
Instructions for attaching new cord, feeding it, and connecting wires to the transformer or junction box.
Guidance on seating the new light assembly and verifying its operation after installation.
Steps for winterizing, including draining water and protecting from elements.
Specific instructions for areas with deep freeze, including draining lines and using anti-freeze.
Emphasizes disconnecting AC power and highlights electrical shock risks when servicing control systems.
Detailed steps for connecting the light power cord to an auxiliary relay in the control system load center.
Wiring diagram for connecting FireFX LED Light to EasyTouch or IntelliTouch Control System Load Center.
Diagram illustrating the standard wiring connection for the FireFX LED Light using a wall switch.
Guide to setting up the MagicBowl Water Effect through the EasyTouch control panel, including circuit naming and functions.
Instructions for setting up the MagicBowl Water Effect via the IntelliTouch control panel, including assigning circuit names.
Steps to assign circuit names to auxiliary circuits for display on the IntelliTouch main screen.
Guide to assigning the circuit function for the MagicBowl Water Effect, such as 'INTELLIBRITE'.
Steps to assign the MagicBowl circuit to the Lights screen for control and feature selection.
Addresses issues where the light will not illuminate and suggests checks for wiring and power.
Provides guidance for troubleshooting when the light does not function properly, focusing on wiring connections.
To Next Page