EasyManua.ls Logo

Pentair SandShark User Manual

Pentair SandShark
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Installation
and User's Guide
Suction-Side Inground Pool Cleaner

Other manuals for Pentair SandShark

Question and Answer IconNeed help?

Do you have a question about the Pentair SandShark and is the answer not in the manual?

Pentair SandShark Specifications

General IconGeneral
BrandPentair
ModelSandShark
CategorySwimming Pool Vacuum
LanguageEnglish

Summary

Customer Service and Support

Customer Service Contact Information

Provides phone and fax numbers for customer service inquiries.

Technical Support Contact Information

Lists phone and fax numbers for technical assistance in different locations.

Safety Precautions

General Safety Warnings and Precautions

Details critical warnings regarding hazardous suction, entrapment, and safe operation.

Warranty Information

Limited Warranty Terms and Conditions

Outlines the manufacturer's limited warranty for the pool cleaner.

Disclaimer of Liability

States limitations of liability regarding pool finish and operation.

Section 1: Pool Preparation

Pool Preparation Steps

Instructions on preparing the pool before cleaner installation, including chemical balance and cleaning.

Cleaner Assembly and Parts Check

Guide to unpacking and verifying all cleaner components are present.

Hose Assembly

Connecting Hose Sections

Step-by-step instructions for connecting the pool cleaner hose sections.

Section 2: Installation

Standard Installation

Detailed steps for installing the cleaner via the pool skimmer.

Optional Vac Port Installation

Instructions for installing the cleaner using a dedicated vacuum port.

Section 3: Adjustments

Hose Adjustments and Balance

Guidance on setting correct hose length and balancing the cleaner.

Adjusting the Flow

Instructions for fine-tuning water flow using the vacuum regulator and flow gauge.

Return Line Flow Adjustments

How to adjust pool return line flow to optimize cleaner movement.

Section 4: Maintenance

Routine Maintenance

Covers basic maintenance tasks like checking the oscillator and pad.

Hose Storage

Recommended methods for storing the pool cleaner hose to prevent damage.

Disassembly and Reassembly

Step-by-step guide for taking apart and putting back together the cleaner.

Section 5: Troubleshooting

Slow Movement or Climbing Issues

Addresses problems like slow movement, failure to climb walls, and debris blockage.

Suction and Air Issues

Troubleshooting tips for insufficient suction or air intake problems.

Tracking and Hose Issues

Solutions for repetitive movement patterns and hose kinking.

Section 6: Replacement Parts

Replacement Parts List

A detailed list of available replacement parts with item numbers and P/Ns.

Notes

Related product manuals