To Next PageTo Next Page
Need help?Do you have a question about the Pentair Swimming Pool Filter and is the answer not in the manual?
General| Brand | Pentair |
|---|---|
| Model | Swimming Pool Filter |
| Category | Swimming Pool Filter |
| Language | English |
Safety warning for installers regarding potential severe injury, death, or property damage if instructions are not followed.
Note informing installers to provide this manual containing installation and operation info to the owner/operator.
Explains how the sand filter removes dirt from pool water and the general flow process.
Warns about severe injury, death, or property damage from pressurized air release due to improper servicing.
Explains how poor water clarity can obscure objects, leading to severe injury or death during swimming/diving.
Guidance on providing space, lighting, and locating the system close to the pool.
Instructions for inspecting parts, checking laterals, and filling the tank with sand.
Steps for installing the filter valve and securing it with the clamp assembly.
Ensuring correct sand, connections, and setting the valve to Backwash for initial cleaning.
Running the pump to backwash and rinse the filter media before normal operation.
Setting the valve to Filter position and starting the pump for normal operation.
Explains cleaning frequency varies and when to backwash based on pressure.
Details the functions of the FILTER, BACKWASH, RINSE, WASTE, CLOSED, and RECIRCULATE positions.
Step-by-step instructions for performing a backwash cycle on the filter.
Instructions for backwashing and setting the valve to the winterize position.
Steps for draining the filter and piping, and protecting equipment from weather.
Addresses issues like insufficient cleanliness, higher filter pressure, and short filter cycles.
Troubleshoots low return flow to the pool with low filter pressure.
Provides remedies for sand returning to the pool, typically due to broken laterals or high backwash rate.
Lists part numbers and descriptions for the 6-way control valve components.
Table detailing filter area, sand capacity, pressure, flow rate, and temperature for different models.
