Pentair CLEAN AND CLEAR PLUS User Manual

CLEAN AND CLEAR
®
PLUS
CARTRIDGE FILTER
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
INSTALLATION AND
USER’S GUIDE
Pressurized air can cause the lid to separate from the tank with great force. To reduce the
risk of severe injury or death, relieve pressure by opening air relief valve before opening
filter. Before starting the pump after servicing, ensure that clamp band is correctly fastened.
See Important Warnings and Safety Instructions (page iii) and follow all instructions exactly;
including the Opening the Filter (page 4), Installing the Filter Lid and Clamp Ring (page 5), and
Start-Up Instructions (page 6).

Pentair CLEAN AND CLEAR PLUS Specifications

General

Filter Type	Cartridge
Flow Rate	150 GPM
Cartridge Quantity	4
Max Pressure	50 psi
Material	Fiberglass-reinforced composite
Inlet/Outlet Size	2 inches
Cartridge Material	Polyester
Filter Area	Varies by model (see product documentation)
Dimensions	Varies by model (see product documentation)
Weight	Varies by model (see product documentation)