The Pentair Clean and Clear® Plus Cartridge Filter is a high-performance filtration system designed for residential swimming pools. It utilizes multiple filter cartridges to remove impurities from pool water, providing clean and clear water for a healthy swimming environment.
Function Description:
The filter operates by directing pool water through a series of four reusable filter cartridges. As water passes through the cartridges, suspended particles, debris, and other contaminants are trapped, while clean water is returned to the pool. The system is designed for ease of use and maintenance, with features that simplify cleaning and cartridge replacement. It is suitable for various pool sizes, offering different models with varying filter area and flow rates to match specific pool requirements. The filter also incorporates an air relief valve for easy air purging and a pressure gauge to monitor system performance.
Important Technical Specifications:
The Clean and Clear® Plus Cartridge Filter comes in several models, each with distinct specifications:
- CCP240: Filter Area: 240 sq. ft., Vertical Clearance: 56 in., Flow Rate GPM: 150 (Res), 150 (Comm), Turnover Capacity in Gallons: 31,400 (6 Hours), 43,200 (8 Hours), 64,800 (12 Hours).
- CCP320: Filter Area: 320 sq. ft., Vertical Clearance: 62 in., Flow Rate GPM: 150 (Res), 150 (Comm), Turnover Capacity in Gallons: 43,200 (6 Hours), 57,600 (8 Hours), 86,400 (12 Hours).
- CCP420: Filter Area: 420 sq. ft., Vertical Clearance: 68 in., Flow Rate GPM: 150 (Res), 150 (Comm), Turnover Capacity in Gallons: 54,000 (6 Hours), 72,000 (8 Hours), 108,000 (12 Hours).
- CCP520: Filter Area: 520 sq. ft., Vertical Clearance: 74 in., Flow Rate GPM: 150 (Res), 150 (Comm), Turnover Capacity in Gallons: 54,000 (6 Hours), 72,000 (8 Hours), 108,000 (12 Hours).
The maximum working pressure of this filter is 50 p.s.i. The filter operates under high pressure, and proper installation and maintenance are crucial for safe operation. The pressure drop versus flow graph illustrates the relationship between flow rate and pressure drop, which is important for understanding system performance.
Usage Features:
- Easy Installation: The filter is designed for straightforward installation on a level concrete slab. It requires proper plumbing connections and an air relief valve for optimal performance.
- Visual Clearance: The filter requires specific vertical and horizontal clearances for visual inspection and maintenance.
- Air Relief Valve: Equipped with a High Flow™ Manual Air Relief Valve, which allows for easy purging of air from the system. This valve should be opened during startup and whenever the system is serviced to prevent air from becoming trapped, which can lead to dangerously high pressures.
- Pressure Gauge: A pressure gauge is integrated into the system to monitor the internal pressure. The primary indicator of how the filter is operating, maintaining your pressure gauge in good working order is a piece of machinery, do not tamper with it, attempt to disassemble it or otherwise adjust it unless you fully understand it’s operation. Serious injury or death can occur if the equipment is improperly handled. Consult a pool service professional for maintenance and service assistance.
- Clamp Installation: The filter lid is secured with a clamp assembly, which must be properly installed and tightened to ensure a secure seal and prevent leaks.
- System Restart: After any maintenance or cleaning, the system must be restarted correctly, ensuring the air relief valve is opened to release trapped air and the pressure gauge is monitored.
Maintenance Features:
- Filter Cleaning: The filter cartridges require periodic cleaning to maintain optimal performance. This involves disassembling the clamp, removing the filter lid, and then removing and cleaning the cartridges. The frequency of cleaning depends on pool usage and water conditions, typically indicated by a pressure reading 8-10 p.s.i. higher than the original starting pressure.
- Manual Air Relief Valve Operation: The High Flow™ Manual Air Relief Valve should be opened to release air whenever the system is started, after cleaning, or if the system has been off for an extended period. This prevents air from building up inside the filter, which can cause dangerous pressure levels.
- Cartridge Replacement: Over time, filter cartridges will wear out and need to be replaced. The lifespan of the cartridges can vary depending on pool conditions and usage. Replacing cartridges involves disassembling the filter, removing the old cartridges, and installing new ones.
- Disassembly and Reassembly: The filter is designed for relatively easy disassembly and reassembly for cleaning and maintenance. This involves removing the clamp, lid, and then the internal filter components.
- Troubleshooting: The manual provides a troubleshooting section to address common issues such as air entering the system, low water level in the pool, air bubbles in the pool, and dirty water returning to the pool. This helps users diagnose and resolve minor problems without professional assistance.
- Safety Instructions: Emphasizes important safety instructions, including warnings about operating the filter under high pressure, the importance of proper assembly, and the risks associated with tampering with the system. Always follow all instructions to prevent serious injury or property damage.
The Pentair Clean and Clear® Plus Cartridge Filter is a robust and efficient solution for maintaining pool water quality, combining effective filtration with user-friendly design and maintenance procedures.
Need help?
General
To Next Page