EasyManua.ls Logo

Pentair Posi-Chlor-15 - User Manual

Pentair Posi-Chlor-15
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S MANUAL
SALT WATER CHLORINATOR
POSI-CHLOR
®
Should the installer or owner be unfamiliar with the correct installation
and/or operation of this type of equipment, please contact the distributor
or manufacturer for the correct advice before proceeding with the
installation or operation of this product.
PENTAIRPOOL.COM.AU

Table of Contents

Questions and Answers

  • A
    Angela AlexanderAug 11, 2025
    How to fix lack of salt in Pentair Posi-Chlor-15 Water Filtration Systems?
    • D
      dennistaylorAug 11, 2025
      If your Pentair Water Filtration System indicates a lack of salt, it could be due to several reasons. First, ensure you've added enough salt to your swimming pool. If the salt level is adequate, check the electrolysis cell for any incrustations or foreign objects that might be hindering the current. Cleaning the cell might resolve this. Lastly, if the electrolysis cell is old or worn out, consider replacing it with a new one.
  • C
    Christian PetersonAug 18, 2025
    What to do if Pentair Posi-Chlor-15 Water Filtration Systems show excess salt?
    • V
      vwallaceAug 19, 2025
      If your Pentair Water Filtration System indicates excess salt, it may be due to too much salt in the water. If the excess isn't significant, no action is required. Otherwise, check the electrolysis cell for incrustations or objects causing excess current and clean the cell.
  • E
    emarshallAug 26, 2025
    Why is my Pentair Water Filtration System overheating?
    • I
      Ian SmithAug 26, 2025
      If your Pentair Water Filtration System displays a temperature issue, it might be because the ambient temperature is too high (above 400). Try relocating the equipment to a cooler spot or improving ventilation. Allow the equipment to cool down for a few minutes. Another possible cause is obstructed or misaligned radiator fins. Make sure air can circulate properly for cooling.
  • N
    Nicholas WeeksSep 3, 2025
    What does cleaning mean on Pentair Posi-Chlor-15?
    • D
      Daniel WrightSep 3, 2025
      The Pentair Water Filtration System is in the self-cleaning process, which lasts 5 minutes.

Summary

General Product Description

Technical Specifications

Lists technical data like supply voltage, production, power, dimensions, and protection ratings.

Safety and Recommendations

Provides essential safety guidelines for installation and operation of the equipment.

Equipment Installation Guide

Electrolysis Cell Installation

Provides instructions on the correct placement and mounting of the electrolysis cell.

Control Centre Mounting

Guides on how to securely mount the control centre unit at the recommended height.

pH Peristaltic Pump Connection

Advanced pH;ORP Kit Installation

Explains the installation of the advanced pH/ORP probe kit for enhanced control.

Hydraulic Connection Diagrams

Electrical Wiring Diagram and Connections

Shows electrical connections, terminal assignments, and notes for proper setup.

Start-Up and Adjustments

Display and Control Interface

Main Menu Navigation

General Configuration Settings

Operating Control Modes

Chlorine Production and ORP Setpoints

Adjusting maximum chlorine output and setting the target ORP level for automatic control.

Advanced pH Menu Operation

Navigates and adjusts advanced pH control parameters.

pH Adjustment

Adjusting the target pH value for the pool.

pH Probe Calibration

Step-by-step guide to calibrate the pH probe for accurate readings.

pH Control Switching and Pump Management

Pump Error Handling and Predictive pH

Filter Pump Operation Scheduling

Troubleshooting and Alarms

Warning and Alarm Message Interpretation

Explains alarm messages, warnings, their causes, and required corrective actions.

Specific Error Diagnosis

Cell Lifespan and Operation Times

Maintenance Procedures

Electrolysis Cell Cleaning

Instructions for cleaning the electrolysis cell under specific conditions like scale buildup.

ORP Probe Check and Maintenance

pH Probe Maintenance and Recalibration

Guarantee and Service Information

Pentair Posi-Chlor-15 Specifications

General IconGeneral
Product TypeSalt Chlorine Generator
ModelPosi-Chlor-15
ApplicationResidential Swimming Pools
InstallationIn-line
TypeSaltwater
Voltage120V/240V

Related product manuals