Posi-Chlor® Salt Water Chlorinator Owner’s Manual Posi-Chlor® Salt Water Chlorinator Owner’s Manual
29
4.7.3 Program (2/24h)
This allows two individual daily programs. Press the OK button to save the value and move
to the next. After the last option is saved, it will automatically exit this menu and this option
will be selected. An asterisk will show next to this option. Press the buttons together
to cancel and revert to the previous menu.
4.7.4 Program OFF
Cancels and details the programs carried out.
4.7.5 Timer
Runs the filter pump for a set time 0-120minutes, before pump automatically turns off.
4.8 Time
The equipment has a time clock, which will be taken as the reference when programming
times of the auxiliary relay. The clock keeps the time setting even when the equipment is
without supply.
4.9 Adding the Optional Temperatur Probe - Salt Calculation
The optional temperature probe can be installed on terminals 7&8 on the internal terminal
block. Once the temperature probe is added the unit will automatically start displaying the
current water temperature and also a calculated value for the water salinity.
4. START-UP AND ADJUSTMENTS
To Next Page
Loading...
