Posi-Chlor® Salt Water Chlorinator Owner’s Manual
14
3. INSTALLATION OF THE EQUIPMENT
3.7 Electrical wiring diagram
1 3 5 7 9 11 13
2 4 6 8 10 12 14
N L SW1 SW2 pH1 pH2 RLY OUT FILTER
CELL
Terminal Description Notes
Earth Earth Connections Pre-wired in factory.
N, L 230-240VAC Supply Pre-wired in factory.
SW1, SW2 On/Off Switch Input
Bypassed in factory. Remove loop
between SW1 and SW2, to connect
automation.
pH1, pH2 Acid Pump Output (230VAC) Connection for acid dosing pump.
To Next Page
Loading...
