Pentair IntelliChlor IC20 User Manual

2022-5739
2022-12-02
IntelliChlor Salt Chlorine Generator Model IC20
CONTROLS BACTERIA AND ALGEA In Swimming Pool Waters
DOMESTIC
A maximum of 72 000 L of water can be treated with one IC20 unit.
Maximum output of hypochlorous acid equivalent to 0.22 kg of free available chlorine per day.
For swimming pools, a minimum of 1 ppm of free available chlorine must be maintained.
READ THE LABEL AND OPERATING MANUAL BEFORE USING
KEEP OUT OF REACH OF CHILDREN
REGISTRATION NO. 28366
PEST CONTROL PRODUCTS ACT
WARNING: Operating IC20 without water flow through the cell can cause a build up of flammable gases which can result in FIRE OR EXPLOSION.
Pentair Water Pool and Spa, Inc.
1620 Hawkins Ave., Sanford, NC 27330
10951 West Los Angeles Ave., Moorpark, CA 93021
(919) 566-8000
17227R1

Pentair IntelliChlor IC20 Specifications

General

Model	IntelliChlor IC20
Type	Salt Chlorine Generator
Pool Size	Up to 20, 000 gallons
Voltage	120/240 VAC
Power Supply	External Power Center
Flow Rate	Minimum 20 GPM
Water Temperature	50°F to 104°F (10°C to 40°C)
Cell Life	10, 000 hours
Warranty	3 years
Chlorine Output	0.7 lbs/day

Summary

Important Safety Precautions

General Safety Warnings and Cautions

Key safety advice covering electrical hazards, chemical handling, and operational risks.

Installation Steps Summary

Review Safety, System, and Procedure Information

Guidance on reviewing safety, system overview, and installation/operation steps.

Installation Guide: Power Center

Kit Contents, Tools, and Mounting Procedures

Details on kit contents, tools, and steps for mounting the Power Center.

AC Power Connection and Grounding

Earth Bonding Procedure

Procedure for ensuring proper earth bonding for safety and equipment protection.

Troubleshooting Overview

System and Power Center Troubleshooting Tables

Common problems, causes, and corrective actions for the IntelliChlor system and Power Center.

Cell Assembly Installation

Connecting Cell to Power Center and IntelliTouch

Procedures for connecting the cell assembly to the Power Center and IntelliTouch system.

User's Guide: Control Panel

Status Indicators and LEDs

Explanation of salt level indicators, system status LEDs, and sanitizer output indicators.

Cell Cleaning and Winterizing

Electrolytic Cell Cleaning Procedures

Detailed steps for automatic and acid wash cleaning of the electrolytic cell.

Winterizing the Pool and Cell

Salt Management

Chlorine Testing and Salt Type Selection

Salt Quantity and Addition

Salt and Stabilizer Tables

Salt Addition Tables

User's Guide: Troubleshooting

Troubleshooting Tables

Comprehensive tables listing common problems, causes, and corrective actions.