Introduction
System Description
The IntelliChlor™ salt chlorinator uses a process known as electrolysis to produce Sodium Hypochlorite (liquid
chlorine) from a low concentration of salt added to the pool water. Hypochlorite kills bacteria, oxidizes organic
material, and kills algae, then reverts back to salt. IntelliChlor then reuses the salt and the process starts over
again. The IntelliChlor system is comprised of the Power Center and Electrolytic Cell.
Features
• Design combines cell and control panel as one assembly.
• Cellbladesaremadefroma titaniummetalbaseandcoatedwithpreciousmetal Rutheniumoxide.
• Cell blades are capable of lasting in excess of 10,000 hours.
• The cell assembly can be installed horizontally or vertically.
• Separate Power Center mounts to wall at equipment pad, for easy AC wiring.
• Easily serviced.
• Salts run cool for long, reliable life.
• Cell hours meter reports current usage to determine how many hours remain.
• The IntelliChlor IC20 model produces 0.22 kg of free available chlorine per day.
• Salt level bar graph shows the amount of salt in pool.
• Red and green LED indicators show system status for power, water flow, and cell status.
• MORE and LESS buttons control how much chlorine is produced.
• BOOST cycle sets the unit to maximum chlorine output for 24 hours.
• Cell lifetime is tracked with at-a-glance green LEDindicators.
• Meets all requirements for UL 1081 standards.
IntelliChlor
The IntelliChlor salt chlorinator system comprises of the following
• PC 100 (P/N 520556): IntelliChlor power center. The IntelliChlor cell connects to the power center
• IC20 Cell (P/N 520554): Designed for pools up to 72,000 Litres, the cell will produce
approximately 0.22 Kg of free available chlorine per 24 hour period. This cell uses two terminal
blades and five bi-polar blades, making this system more cost competitive.
• IntelliChlor pass-through cell (P/N 520588): This optional pass-through cell is installed for a new pool
start-up.
To Next Page
Loading...
Need help?
General
