Pentair IntelliChlor IC20 User Manual

13
IntelliChlor User’s Guide
Optimum Pool Water Conditions
It is recommended that the following water balance conditions be maintained on an on going basis to protect
the pool finish and equipment and ensure the pleasing appearance of the water. IntelliChlor is warranted to
operate properly only if these conditions aremet.
Free available chlorine:
1.0 - 3.0 PPM. Above 3.0 PPM may cause corrosion of pool metals
Combined chlorine (chloramines):
None (Super Chlorinate to remove all Chloramines)
PH:
7.2 - 7.8 (USE MURIATIC ACID to lower pH and Soda Ash to raise pH.)
Chlorine stabilizer (cyanuric acid):
30 - 100 PPM (50-75 ideal ppm)
Total Alkalinity:
100 - 120 PPM
Calcium hardness:
200 - 300 PPM
Metals (copper, Iron, manganese):
None
Nitrates:
None

Pentair IntelliChlor IC20 Specifications

General

Model	IntelliChlor IC20
Type	Salt Chlorine Generator
Pool Size	Up to 20, 000 gallons
Voltage	120/240 VAC
Power Supply	External Power Center
Flow Rate	Minimum 20 GPM
Water Temperature	50°F to 104°F (10°C to 40°C)
Cell Life	10, 000 hours
Warranty	3 years
Chlorine Output	0.7 lbs/day