Pentair IntelliChlor IC20 User Manual

17
IntelliChlor User’s Guide
Pool Water Preparation
Determining Pool Size in meters (liters of Water in Your Pool)
• Rectangular Pools: Length x width (meters) x average depth x 1000
• Circular Pools: Diameter x diameter x average depth x 785
• Oval Pools: Length x width (meters) x average depth x 893
• Sloping Sides: Multiply total m3 by0.85 = m3 capacity.
Determining Pool Size in feet (Gallons of Water in Your Pool)
• Rectangular Pools: Length x width (feet) x average depth x 7.5
• Circular Pools: Diameter x diameter x average depth x 5.9
• Oval Pools: Length x width (feet) x average depth x 6.7
• Sloping Sides: Multiply total gallons by 0.85 = gallon capacity
IntelliChlor Pass-Through Cell
After new pool construction has been completed, in order to prevent debris from entering the IntelliChlor
cell assembly, it is recommended that the IntelliChlor pass-through cell (P/N 520588) be installed before
installing the IntelliChlor cell. After the pool system has flushed the debris from the pipes, remove the
pass-through cell and install the IntelliChlor cell.
CAUTION:
Never use dry acid to adjust pH in arid geographic areas with excessive evaporation and minimal
dilution of pool water with fresh water. A buildup of byproducts can damage the electrolytic cell.

Pentair IntelliChlor IC20 Specifications

General

Model	IntelliChlor IC20
Type	Salt Chlorine Generator
Pool Size	Up to 20, 000 gallons
Voltage	120/240 VAC
Power Supply	External Power Center
Flow Rate	Minimum 20 GPM
Water Temperature	50°F to 104°F (10°C to 40°C)
Cell Life	10, 000 hours
Warranty	3 years
Chlorine Output	0.7 lbs/day