To Next Page
J
Jon EllisJul 26, 2025
What to do if the IntelliChlor green power light is off on my Pentair Power Supply?
- QqreedJul 26, 2025
If the IntelliChlor green power light on your Pentair Power Supply control panel isn't on, here's what you can check: * **Blown Fuse:** Replace the 10AMP fuse located on the main circuit board. * **No AC Power:** Make sure the time clock is sending 110VAC or 220 VAC to the Power Center when it's active. * **Incorrect Wiring:** Check the transformer leads are correctly wired to the AC source, using the wiring diagram on the inside of the Power Center cover.
General
