FILTRATION & PROCESSING SOLUTIONS
QL2-OW200L FILTER INSTALLATION AND OPERATION GUIDE
The Everpure QL2-OW200L Water Filter reduces chlorine tastes and odors in drinking water and beverages made with water.
The OW200L also filters out dirt and rust, and reduces the formation of limescale which builds-up in water-using appliances
that heat or freeze water. Perhaps most important, the OW200L reduces both lead and trihalomethanes (THMs) to below
Federal limits.
PARTS LIST
Key Letter Description Part Number
A QL2 Head Assembly EV3063-32
B OW200L Cartridge EV9619-01
C Mounting Screw (2 req’d) EV3061-96
D Star Washer (2 req’d) EV3062-04
E Flow Control/Quick Disconnect EV3081-32
F Mounting Bracket EV3055-34
G Bracket Screw (3 req’d) EV3062-03
SPECIFICATIONS
Rated Service Flow: 0.5 gpm / 1.9 Lpm
Maximum Working Temperature: 35-100°F (2-38°C)
Min/Max Operating Pressure: 10 psi (0.7 bar) / 125 psi (8.6 bar)
Capacity: 480 gallons (1816 L)
Flow Rate: 0.5 gpm (1.9 Lpm)
For cold water use only.
Not for use with water preheated over 100 °F (38 °C).
This drinking water system must be maintained in accordance with the manufacturer’s instructions, including the timely
replacement of filter cartridges.
EVERPURE
®
QL2OW200L WATER FILTER
A
B
C
D
E
F
G
INCOMING FITTING FROM COLD WATER
SUPPLY PROVIDED BY INSTALLER
TO
WATER INLET
To Next Page
Need help?
General
