EasyManua.ls Logo

Pentair CLEARPRO TECHNOLOGY TR100 User Manual

Pentair CLEARPRO TECHNOLOGY TR100
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CLEARPRO TECHNOLOGY
®
Filter Laterals Extension Kits Installation and User’s Guide
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
CLEARPRO TECHNOLOGY
®
INSTALLATION AND
USER’S GUIDE
FILTER LATERALS EXTENSION KITS
FOR FILTER MODELS: TR100, TR100C, TR100C3, TR140, TR140C, TR140C3 AND TA100
Question and Answer IconNeed help?

Do you have a question about the Pentair CLEARPRO TECHNOLOGY TR100 and is the answer not in the manual?

Pentair CLEARPRO TECHNOLOGY TR100 Specifications

General IconGeneral
Inlet/Outlet1" NPT
Tank MaterialFiberglass
System Diameter10"
System Height54"
Connection Size1"

Summary

IMPORTANT WARNING AND SAFETY INSTRUCTIONS

Attention Installer

Information for professionals installing the filter extension kits.

Attention User

Information for end-users operating and maintaining the filter.

Consumer Information and Safety

General safety guidelines and user responsibilities for pool equipment.

Hazardous Pressure: Stand Clear of Pump and Filter During Start Up

Warning about high pressure risks during system operation.

OVERVIEW

ClearPro Technology Filter Lateral Extension Kits

Details and specifications for the specific filter lateral extension kits.

General Filter Information

Background on filter operation, water chemistry, and system requirements.

KIT INSTALLATION

Installing the ClearPro Technology Filter Laterals Extension Kits

Step-by-step guide for installing the extension kits onto filters.

Triton II Sand Filters Installation

Specific instructions for installing kits on Triton II sand filter models.

Tagelus Sand Filters Installation

Specific instructions for installing kits on Tagelus sand filter models.

Filling the Filter with Sand

Procedure for adding the correct type and amount of sand to the filter.

Before Starting the Filter

Pre-operational checks and ensuring proper setup before initial use.

START UP INSTRUCTIONS

For Threaded Closures

Installation steps for filter closures with threaded connections.

For Oval Closures

Installation steps for filter closures with oval connections.

Backwashing the Filter Before Start Up

Procedure to clean the filter media before initial operation.

Initial Start Up

Steps for starting the filter system for the first time after installation.

Filter Care

Filter Care Suggestions

Recommendations for maintaining the filter and ensuring longevity.

FILTER MAINTENANCE

Cleaning Frequency

Guidance on when to perform backwashing and cleaning based on filter usage.

Chemical Cleaning Procedure

Detailed steps for using chemical cleaners to maintain sand bed performance.

Related product manuals