1
CLEARPRO TECHNOLOGY
®
Filter Laterals Extension Kits Installation and User’s Guide
OVERVIEW
* TR100 and TR140 are based on 15 GPM/SQ. FT.
FILTER
MODEL
FILTER
AREA
(SQ. FT.)
FLOW
RATE*
(GPM) @20
GPM/FT
²
TURNOVER CAPACITY (GALLONS)
(BASED ON 20 GPM / SQ. FT.)*
4 TURNS PER DAY 3 TURNS PER DAY 2.4 TURNS PER DAY 2 TURNS PER DAY
TR100 4.91 74 26,640 35,520 44,400 53,280
TR140 7.06 106 38,160 50,880 63,600 76,320
TA100 4.9 100 36,000 48,000 60,000 72,000
TR100C 4.91 98 35,280 47,040 58,800 70,560
TR100C3 4.91 98 35,280 47,040 58,800 70,560
TR140C 7.06 141 50,760 67,680 84,600 101,520
TR140C3 7.06 141 50,760 67,680 84,600 101,520
Filter Operation Data
General Filter Information
Clear water is the result of proper filtration as well as
proper water chemistry. Pool chemistry is a specialized
area and you should consult your local pool service
specialist for specific details. In general, proper pool
sanitation requires a free chlorine level of 1 to 3 PPM
and a pH range of 7.2 to 7.6.
Note: Please note that a filter removes suspended matter
and does not sanitize the pool. The pool water must be
sanitized and the water must be chemically balanced for
sparkling clear water.
Your filtration system should be designed to meet your
local health codes. As a minimum, you must be sure
that your system will turn over the total volume of water
in your pool at least twice in a twenty-four hour period.
Filters operate under pressure and if assembled
improperly or operated with air in the water
circulation system, the lid can separate and result in an accident causing
property damage or serious bodily injury. A warning label has been
affixed to the top of the filter and should not be removed. Keep safety
labels in good condition and replace if missing or illegible.
ClearPro Technology
®
Filter Lateral Extension Kits
For Triton
®
II Sand Filter Models:
TR100, TR100C, TR100C3, TR140, TR140C, TR140C3
For Tagelus
®
Sand Filter Model:
TA100
To Next Page
Loading...
