Pentair ULTRATEMP ETi 220 - TECHNICAL DATA; Electrical and Temperature Specifications

ULTRATEMP ETI™ Hybrid Heater Installation and User’s Guide
35
* 80A-80RH-80W: 80° F Air Temp, 80% RH, 80° F Water Inlet Temp.
** 80A-63RH-80W: 80° F Air Temp, 63% RH, 80° F Water Inlet Temp.
*** 50A-63RH-80W: 50° F Air Temp, 63% RH, 80° F Water Inlet Temp.
**** Includes shipping crate.
COP = Coefficient of Performance
Voltage/Phase/Hz
208-230/1/60
42
Recommended Fuse Size
50
Max Fuse Breaker Size
70
Compressor/Fan Motor/System
RLA
Compressor/Fan Motor/System
LRA
Compressor/Fan Motor/System
MCC
Capacity (Btu/h) 80A-80RH-80W * 108,000
COP 80A-80RH-80W * 5.8
Power Input, KW (80A-80RH-80W) *
Current, Amp (80A-80RH-80W) *
24
100,000
5.6
24
70,000
4
23
Shipping Weight (lbs) **** 520
Shipping Size (L x W x H)****
58"x43"x52"
5.3
50/NA/NA
HEATER ELECTRICAL REQUIREMENTS
32/2/34
5.3
5.2
Capacity (Btu/h) 80A-63RH-80W **
COP 80A-63RH-80W **
Power Input, KW (80A-63RH-80W) *
Current, Amp (80A-63RH-80W) *
Capacity (Btu/h) 50A-63RH-80W ***
COP 50A-63RH-80W ***
Power Input, KW (50A-63RH-80W) *
Current, Amp (50A-63RH-80W) *
Min. Circuit Ampacity (Amp)
148/4/150
Electrical Supply - Voltage Requirements
TECHNICAL DATA
WATER / DEFROST
°F OHMS °F OHMS
30 34,367 85 8,230
35 30,254 90 7,403
40 26,031 95 6,531
45 23,014 100 5,894
50 19,901 105 5,221
55 17,255 110 4,634
60 15,351 115 4,202
65 13,373 120 3,758
70 11,942 125 2,404
75 10,450 130 3,042
80 9,366
If voltage drops below 208V, this may damage the heater and void the
warranty. Take proper steps to ensure correct voltage at the heater during
operation.
Temperature Resistance Chart
STACK FLUE
°F OHMS °F OHMS °F OHMS
30 29,101 85 8,496 140 3,012
35 25,644 90 7,698 145 2,773
40 22,724 95 6,936 150 2,542
45 20,300 100 6,315 155 2,341
50 17,999 105 5,717 160 2,154
55 16,175 110 5,209 165 1,985
60 14,425 115 4,737 170 1,833
65 12,971 120 4,318 175 1,691
70 11,633 125 3,944 180 1,567
75 10,466 130 3,598 185 1,446
80 9,436 135 3,299
ENGLISH