12
Complete solution
SAFE USAGE
Keep the emitters clean by wiping the dust out of them with adry cloth. Never use any cleaning
agents, solvents or chemical preparations. Do not push the emissive hole optic with any object.
Regularly check the condition of the battery inside the simulator body to make sure it does not
corrode or leak.
If you will not be using the simulator for more than one week, you must remove the battery. Also
remove the battery before traveling by plane.
STORAGE
It is very important to store the laser simulator under the correct conditions to keep it in good,
reliable condition. Always do the following:
• Before storing the simulator for an extended time, always remove the battery. This prevents
internal damage to the simulator if the battery leaks.
• Store the simulator in the original packaging (case) in adry, dark place out of reach of children.
• Do not place any heavy objects on the case, or items that may leak fluids.
• Protect the simulator from weather, including frost and moisture. The optimal storage
temperature is between +5 and +30° C. The storage location’sair humidity must not exceed
60%. Do not store the simulator in adamp environment where there is high risk of corrosion.
SPARE PARTS
The following replacement parts are available for the simulator:
• front sights
• rear sights
• stock
• plumb
• trigger
Order replacement parts by e-mail from business@pentashot.eu or from PENTASHOT partners
and dealers. Alist of them can be found at www.pentashot.eu.
Only the manufacturer or an authorized individual has the right to replace the simulator’smain
parts (optics and electronics, including parts of the trigger mechanism).
To Next Page
Loading...