Pentax 645N - Page 47

85 Fie
Bw
3. Set the shutter speed dial to the desired shut-
ter speed.
*When the shutter release button is depressed
halfway down, the shutter speed and the aperture
value will be displayed in the viewfinder.
* In flash photography, when you use the flash sync
shutter speed of 1/60 second or a non-dedicated
external flash unit, set the shutter speed dial to the
[X] (1/60 of second) position.
* Exposure Warning
If the subject is too bright or too dark, the shutter
speed and aperture setting in the viewfinder blink.
When the subject is too bright, choose a faster shut-
ter speed. If it is too dark, choose a slower shutter
speed. When the shutter speed indication stops
blinking, you can take the picture. If both selected
shutter speed and aperture blink, it means that the
exposure is out of metering range, unable to obtain
a correct exposure even if the shutter speed is
adjusted. Select a darker subject if the subject is too
bright. Use a flash if it is too dark.
SNOLLVH3dO Q39NVAQV | | |