17 Camera Setup
Charging the Battery
English
Charging the Battery
1. Insert the battery into the camera and connect the power adapter to
the DC-in port as shown in the picture.
2. Connect the power adapter to a live household outlet to start
charging. The power LED will blink during the charging process.
3. Disconnect the power adapter when the charging is done.
4. When the charging is done, Power LED turns off.
Charging the battery with USB power
1. Turn the power off and connect the USB cable with the camera and the computer.
2. The power LED will flicker during the charging process.
3. The power LED will turn off automatically when the charging is done.
Turning On
Press and hold the Power button to turn on the camera. To turn off the camera, press the Power
button again.
To Next Page
Loading...
