Getting Started 22
Taking Photos
English
Using the AEB (Auto Exposure Bracketing) Function
When using the AEB (Auto Exposure Bracketing) function, the camera auto-matically takes 3
consecutive photos with different exposures by pressing the Shutter button once. For example, when
the current EV compensation value is +1.0 EV and the AEB bracket interval value is set to ±0.3, the
camera takes shots of the same scene with 3 varying levels of exposure: +0.7 EV, +1.0 EV, and +1.3 EV.
This function is only available in Auto, Auto Scene and P-Mode modes. To set the AEB mode:
1. Press the MENU button to display menu options.
2. Press the Left/Right navigation buttons to select AEB setting.
3. Press the Up/Down navigation buttons to select from the
available options:
• AEB: Select to enable (ON) or disable (OFF) the AEB
function.
• BRACKET: Select to set the bracket interval value ranging
from ±0.3 to ±2.0 EV in 0.3 or 0.4 EV increments.
• EXIT: Select to apply new settings to the camera and return to
the setup menu.
Note:
1. When taking AEB shots, hold the camera steadily. For the best result, use the tripod.
2. Flash, Burst, and M-Burst modes are not allowed when the AEB function is enabled.
AEB
AEB
BRACKET
EXIT
ON
0.3EV
Downloaded from ManualsCamera.com Manuals
To Next Page
Loading...
