14
Aim the camera at the subject, then press the shutter release
button. The flash discharges automatically depending on the
brightness.
Frame the subject using the focus frame on the display.
Turn the zoom lever to change the captured area.
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in
focus.
Press the shutter release button
fully.
The picture is taken.
2
1
2
2
widens the area
captured by the
camera
enlarges the
subject
2
3
F4.6
1/250
38
2
4
Taking Pictures
3
3
QSG_I-10.book Page 14 Tuesday, February 2, 2010 3:32 PM
To Next Page
Loading...
Need help?
General
