Pentax Optio LS 465 - Resetting to Default Settings (Reset)

134
6
Settings
2 Press the four-way controller (5).
A pull-down menu appears.
3 Use the four-way controller (23) to select the time
until the camera turns off automatically.
Choose from [5min.], [3min.] or [Off].
4 Press the 4 button.
The setting is saved.
You can choose the start-up screen displayed when the camera is
turned on.
You can choose any of the following images as the start-up screen:
- The Guide Display Start-up Screen showing a guide for the shooting
modes and buttons
- PENTAX logo
- One of your own images (compatible images only)
1 Use the four-way controller (2345) to select R
(Start-up Screen) from the Playback Mode Palette.
2 Press the 4 button.
The image selection screen appears.
3 Use the four-way controller
(45) to choose the image
for the start-up screen.
Only images available for the start-up
screen are displayed. You can also
Auto Power Off does not function in the following situations:
- While taking pictures in j (Continuous Shooting) or q (Burst
Shooting) mode
- While recording a movie
- During a slideshow or movie playback
- While the camera is connected to a computer
Changing the Start-up Screen
100
-
0017
1 0 0
-
0 0 1 7
100
-
0017
MENU
OK
OK
OK
OK
Cancel
Cancel
Cancel