Pentax Optio RS1500 - Page 86

84
3
Taking Pictures
3 Use the four-way controller
(2345) to choose the frame you
want to use.
4 Press y on the Zoom/f/y button.
The selected frame appears in single-image display.
You can choose another frame using either of the following operations.
Four-way controller (45) Press to choose a different frame.
Zoom/f/y button (f) Press to return to the 9-frame display of
the frame selection screen, and then
perform Step 3 to choose a different
frame.
5 Press the 4 button.
The frame appears on the display.
When the camera detects a face, the Face
Detection function is activated and the face
detection frame appears (p.67).
6 Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
7 Press the shutter release button fully.
The picture is taken.
•In N mode, recorded pixels is fixed at h (2048 × 1536).
• At shipment, the camera includes 3 default frames built-in. These
frames are not deleted if the built-in memory is formatted.
• The CD-ROM (S-SW116) supplied with the camera contains a total of
90 optional frames. To save the optional frames into the built-in
memory, copy the files from the CD-ROM (p.149).
Adding a Frame to a captured image 1p.147
y
OK
O K
OK
OK
38
3 8
38
14:25
1 4 : 2 5
14:25
1 0 / 1 0/2010
10/10/2010