119
7
Settings
You can select the output format (NTSC or PAL) for taking or playing
back images on a TV.
1 Select [Video Out] on the [B Set-up] menu.
2 Use the four-way controller (45) to select [NTSC] or
[PAL].
Choose the video output format to match the output format of the TV.
3 Press the OK button.
The camera is ready to take or play back images.
You can change the USB connection mode depending on whether the
USB cable is to be connected to a printer (PictBridge) or a computer.
1 Select [USB Connection Mode] on the [B Set-up] menu.
2 Use the four-way controller (45) to select [PC] or
[PictBridge].
3 Press the OK button.
The camera is ready to be connected to the computer or printer.
Changing the Video Output Format
Changing the USB Connection Mode
Format
Sound
Date Adjust
World Time
On
On
English
10/10/2004
Off
Language/
Start-up Screen
Set-up
MENU
OK
OK
Exit
e_kb364.book Page 119 Monday, February 16, 2004 3:50 PM
To Next Page
Loading...
