41
Taking Pictures
4
In
R (Program mode), the camera automatically sets the shutter speed
and aperture for taking still pictures. However, you can select other
functions such as the Flash mode or Continuous Shooting mode.
1 Press the four-way controller (3) in Capture mode.
The Capture mode screen appears.
2 Use the four-way controller
(2345) to select R (Program
mode).
3 Press the OK button.
4 Set the functions you want to use.
Refer to “Setting the Shooting Functions”
(p.66 to p.83) for details of how to set the functions.
5 Press the shutter release button halfway.
The focus frame on the LCD monitor will light green when the camera
is in focus.
6 Press the shutter release button.
The picture is taken.
Setting the Functions (Program Mode)
Taking Still Pictures 1p.26
5
3
1, 2
4
OK
OK
Program
e_kb364.book Page 41 Monday, February 16, 2004 3:50 PM
To Next Page
Loading...
