Pentax Optio S5z - Changing the Focusing Area

82
Taking Pictures
4
You can change the autofocus area (Focusing Area).
Focusing Area
1 Press the MENU button in Capture mode.
The [A Rec.Mode] menu appears.
2 Use the four-way controller (23)
to select [Focusing Area].
3 Press the four-way controller (5).
The pull-down menu appears.
4 Use the four-way controller (23)
to change the setting.
5 Press the shutter release button halfway.
The camera is ready to take the picture.
Changing the Focusing Area
[ ] Multiple
The camera measures a wide range in the center of the
monitor (within the focusing area) and focuses on the
nearest subject.
[ ] Spot
The camera narrows a range (the focusing area) to
measure and makes it easier for you to focus on a
specific subject.
Saving the Focusing Area Setting 1p.96
Rec. Mode
MENU
Exit
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
AWB
AUTO
5M
1
MENU
5
2, 3, 4
Rec. Mode
MENU
Cancel
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
AWB
AUTO
OK
OK
5M