Pentax PC-555 - Page 12

Slack
.,\
,---\
XW
ow
o
Make sure the
film
is taut as shown above;
if
slack,
it may not be
loaded
properly.
3.
Pull
the
film leader out
far
enough to
reach the
O
film roller.
o
Align the
end
of the
film leader with the
O
film leader end
mark.
o
Make sure
the
film
perforations
engage the
G)
sprocket
teeth
properly.
e
Also make sure
the
film is
properly
placed
between
the
O
guide
rails.
10
www.orphancameras.com