Pentax PC35AF User Manual

i
1
HHHHHI
■ ||H ^
F3&rs|T/a.X L.EN5
• RENTAX
t for use where there
is insufficient light—or to fill in dark areas an
ion of Batteries
ing/Closing Lens P
7 Status Check
Speed Setting
-oading
iding Film
tina
X Exposure compensation
X Flash photography
rotector x Self-timer
X Focus locking technique
X Difficult auto focusing subji
X Attaching the neck strap
X Tips in taking good photog
X PC35 Winder
■ Preventive camera mainten
■ Specifications
■ Warranty policy
U Insertion of Batteries
The electronic system of your Pentax
PC35AF operates on two 1 SV mini batteries.
(Alkaline battery AAA)
(Caution: NiCd batteries can not be used.)
1. Open the battery chamber cover located at
the base of the camera by sliding it in the
direction of the arrow; use fingernail in the
groove to push the cover.
2. Fit two batteries into the chamber as
indicated—they should be fitted as shown.
Note the + and - markings provided.
3. Close the cover by pushing it back.
The lens protector may be opened by pushing
protector release in the direction of the arrow.
To close, push protector back, locking same in
its original position.
• With the protector closed, a safety device
prevents accidental firing of the shutter;
similarly, the flash pop-up release is also
locked at the same time.
• While holding the camera, even a slight
pushing-back of the lens protector would
activate the built-in safety device, locking the
shutter button. This is to avoid possible
vignetting.

Pentax PC35AF Specifications

General

Film Format	35mm
Focus	Autofocus
Battery	2 x AA batteries
Lens	35mm f/2.8
ISO Range	25 - 400
Flash	Built-in flash
Exposure Control	Automatic