Pentax Zoom 60-X - Page 13

D Close the back cover. The film automatically advances
to the first frame. (Even if no film is loaded, the motor
operates for a second or two after the back cover is
closed.)
When " I " appears
in the exposure
counter on the LCD
panel, the film
automatically stops
winding, and the first
exposure is ready to be taken. The indication seen
above appears.
Notes:
• If* I " does not appear on the LCD panel, the film is
not properly.loaded. Reload the film.
• If the film is not properly loaded," f " flickers on the
LCD panel.
• The exposure counter remains visible even when the
power is off.
B
(D